China Standard Good Quality Chain Coupling – Set- Kc 3012

Product Description

SC Transmission Roller Chain Coupling KC Coupling KC 3012

The products are made of high quality alloy steel production. The plates are punched and squeezed bores by precision technology. The pin, bush, roller are machined by high-efficiency automatic equipment and automatic grinding equipment, then through heat treatment of carburization, carbon and nitrogen protection mesh belt furnace, surface blasting process etc. Assembled precision by Internal hole position, spin riveted by pressure to ensure the performance of the entire chain.

The chain coupling consists of a shaft coupling assembled from 2 rows of roller chain and 2 sprockets which engage them.
The chain ends can be simply connected or dismantled.
The original KANA structure is such that the case has been split into 2 perpendicularly to the shaft, and the cases 3012 to 8571 have a V-shaped groove on both sides with an O-ring inserted to prevent oil leaks.

Product Description

Availability:

 

* Standard roller chain
* OEM roller chain

 

High Performance:
√ Strong Ultimate tensile strength
√ Perfect surface treatment
√ Durable,Flexible
 

 

Quality Assurance:
ISO9001: 2015 and GB/T24001-2016 / ISO14001: 2015.

√Corrosion resistance
√Durable, Robust and Reliable
√Bad condition resistance
√Lower weight–high speed
 

 

Application industries:
√Manufacturing
√Agriculture
√Building Material
√Oil and Gas

√Technology and Science

Package:
Plastic bag+Neutral box +Plywood box

 

Adapted to:
* roller chains based on the requirements of ANSI B29.1
* Roller chain components are shot peened for greater fatigue resistance
* available with single strand roller chain,double strand roller chain,triple strand roller chain,four strand roller chain
* material used for roller chain 40mn
* heat treatment and special surface treatments are available on request

 

Product Parameters

IZE	BORE	Pilot	A	d	O	L	I	S	B	C	BOLT	TORQUE ARM(Nm)	Max (rpm)	(kg.cm2)	WEIGHT
															(kg)
3012	12-16	12	69	25	45	64.8	29.8	5.2	63	10.2	6M	190	5000	3.7	0.4
4012	12-22	12	77	33	62	79.4	36	7.4	72	14.4	6M	249	4800	5.5	0.8
4014	12-28	12	84	43	69	79.4	36	7.4	75	14.4	6M	329	4800	9.7	1.1
4016	14-32	14	92	48	77	87.4	40	7.4	75	14.4	6M	429	4800	14.4	1.4
5014	15-35	14	101	53	86	99.7	45	9.7	85	18.1	8M	620	3600	28	2.2
5016	16-40	16	111	60	93	99.7	45	9.7	85	18.1	8M	791	3600	37	2.7
5018	16-45	16	122	70	106	99.7	45	9.7	85	18.1	8M	979	3000	56.3	3.8
6018	20-56	20	142	85	127	123.5	56	11.5	105	22.8	10M	1810	2500	137.3	6.2
6571	20-60	20	158	98	139	123.5	56	11.5	105	22.8	10M	2210	2500	210.2	7.8
6571	20-71	20	168	110	151	123.5	56	11.5	117	22.8	10M	2610	2500	295	10.4
8018	20-80	20	190	110	169	141.2	63	15.2	129	29.3	12M	3920	2000	520	12.7
8571	20-90	20	210	121	185	145.2	65	15.2	137	29.3	12M	4800	2000	812.4	16
8571	20-100	20	226	140	202	157.2	71	15.2	137	29.3	12M	5640	1800	1110	20.2
1571	25-110	25	281	160	233	178.8	80	18.8	153	35.8	12M	8400	1800	2440	33
12018	35-125	35	307	170	256	202.7	90	22.7	181	45.4	12M	12700	1500	3940	47
12571	35-140	35	357	210	304	222.7	100	22.7	181	45.5	12M	18300	1250	7810	72
16018	63-160	35	375	228	340	254.1	112	30.1	240	58.5	16M	26400	1100	14530	108
16571	80-200	70	440	279	405	310.1	140	30.1	245	58.5	16M	37100	1000	32220	187
20018	82-205	75	465	289	425	437.5	200	37.5	285	71.6	20M	54100	800	50980	286
20571	100-255	90	545	263	506	477.5	220	37.5	300	71.6	20M	77800	600	111100	440
24571	120-310	110	650	448	607	650	302.5	45	340	87.8	20M	137000	600	310000	869
24026	150-360	140	745	526	704	700	327.5	45	350	87.8	20M	186000	500	598500	1260

The biggest characteristic is that the chains can be customized in different standard and materials according to your requirements. Made from the steel and the up-to-date skills as well as precision procedures, the high quality roller chain can withstand strong pressure and high temperature.

Company Profile

FAQ

Shipping

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

View More

How does the chain size affect the performance of a chain coupling?

The chain size has a significant impact on the performance of a chain coupling. The size of the chain refers to the physical dimensions of the roller chain used in the coupling, including the pitch, roller diameter, and width. Here are some key ways in which the chain size affects the performance of a chain coupling:

• Torque Capacity: The chain size directly affects the torque capacity of the chain coupling. Larger chain sizes are generally capable of transmitting higher torque loads due to their increased contact area and greater strength. Smaller chain sizes, on the other hand, have lower torque capacities and are suitable for applications with lighter torque requirements.
• Speed Capability: The chain size also influences the speed capability of the chain coupling. Larger chains can typically handle higher rotational speeds without experiencing issues such as excessive vibration or centrifugal forces. Smaller chain sizes may have limitations in terms of maximum allowable speeds and may not be suitable for high-speed applications.
• Service Life: The selection of an appropriate chain size is crucial for achieving the desired service life of the chain coupling. If the chain is undersized for the application, it may experience premature wear, fatigue, and ultimately fail under the operating conditions. Conversely, using an oversized chain may result in unnecessary costs, increased weight, and reduced efficiency.
• Space Constraints: The physical size of the chain can also impact the overall dimensions and installation requirements of the chain coupling. Larger chain sizes may require more space for proper installation, including clearance for the chain links and sprockets. In applications with limited space, choosing a smaller chain size may be necessary to ensure proper fit and operation.
• Compatibility: The chain size should be compatible with the sprockets and other components of the chain coupling. It is important to ensure that the chain and sprockets are designed to work together, with matching dimensions and tooth profiles. Using an incompatible chain size can lead to poor engagement, increased wear, and reduced overall performance.

When selecting the appropriate chain size for a chain coupling, it is essential to consider the specific requirements of the application, including torque, speed, space limitations, and compatibility with other components. Consulting the manufacturer’s recommendations and guidelines is crucial to ensure the optimal chain size selection for the desired performance, reliability, and longevity of the chain coupling.

How does misalignment affect chain couplings?

Misalignment in chain couplings can have detrimental effects on their performance and lifespan. Here are some ways in which misalignment can affect chain couplings:

• Increase in Load: Misalignment puts additional load on the coupling components. When the shafts connected by the coupling are not properly aligned, the coupling must compensate for the angular, parallel, or axial misalignment. This increased load can lead to excessive stress and premature wear on the coupling components, such as sprockets, roller chain, and connecting pins.
• Uneven Load Distribution: Misalignment can cause an uneven distribution of load across the coupling. As a result, some sections of the coupling experience higher stresses than others. This uneven load distribution can lead to localized wear and fatigue, reducing the overall strength and reliability of the coupling.
• Reduced Power Transmission: Misalignment affects the efficiency of power transmission through the coupling. When the shafts are not properly aligned, there is increased friction and slippage between the roller chain and the sprockets. This slippage reduces the amount of power transferred from one shaft to another, resulting in a loss of efficiency and a decrease in the overall performance of the machinery or equipment.
• Increased Wear: Misalignment can accelerate wear on the coupling components. The misalignment causes the roller chain to operate at an angle or with excessive tension, causing additional stress and wear on the chain links, sprocket teeth, and connecting pins. The increased wear can lead to chain elongation, loss of engagement with the sprockets, and ultimately, coupling failure.
• Noise and Vibration: Misalignment often results in increased noise and vibration during operation. The misaligned coupling generates additional vibrations and impacts, leading to excessive noise and potential damage to the coupling and surrounding equipment. These vibrations can also propagate through the connected machinery, affecting its overall performance and reliability.

To mitigate the negative effects of misalignment, it is crucial to ensure proper alignment of the shafts and the chain coupling during installation and periodically check and adjust the alignment as needed. Proper alignment minimizes stress on the coupling components, maximizes power transmission efficiency, and extends the service life of the chain coupling.

How to select the right chain coupling for a specific application?

Choosing the appropriate chain coupling for a specific application involves considering various factors to ensure optimal performance and reliable power transmission. Here are some key steps to guide you in the selection process:

1. Identify Application Requirements: Begin by understanding the specific requirements of the application. Consider factors such as the torque load, speed, misalignment conditions (angular, parallel, axial), and environmental conditions (temperature, moisture, presence of corrosive substances).

2. Determine Torque and Speed Requirements: Calculate or estimate the torque and speed requirements of the application. This information is crucial in selecting a chain coupling that can handle the transmitted torque and operate effectively at the required speed range.

3. Evaluate Misalignment Compensation: Assess the expected misalignment conditions in the application. Determine the magnitude of angular, parallel, and axial misalignments that the chain coupling needs to tolerate. This will help in selecting a coupling design that can accommodate the anticipated misalignment without compromising performance or causing excessive stress on the machinery.

4. Consider Space Limitations: Evaluate the available space for the chain coupling. Measure the shaft-to-shaft distance and ensure that the selected coupling can fit within the available space without interference with other components or structures.

5. Assess Environmental Factors: Take into account the environmental conditions in which the chain coupling will operate. Consider factors such as temperature extremes, humidity, presence of dust or debris, and exposure to corrosive substances. Choose a chain coupling that is designed to withstand these conditions and is made from materials that offer adequate corrosion resistance.

6. Consult Manufacturer Specifications: Review the specifications and technical information provided by reputable chain coupling manufacturers. Pay attention to factors such as torque ratings, speed limits, misalignment capabilities, material compatibility, and recommended maintenance practices.

7. Consider Maintenance Requirements: Evaluate the maintenance requirements of the chain coupling. Assess factors such as lubrication needs, ease of inspection, and adjustment procedures. Choose a coupling that aligns with the maintenance capabilities and resources available in your application.

8. Seek Expert Advice if Needed: If you are uncertain about the selection process or have specific application requirements that need expert guidance, consult with knowledgeable engineers or technical representatives from the coupling manufacturer. They can provide valuable insights and recommendations based on their expertise and experience.

By following these steps and considering the specific application requirements, you can select the right chain coupling that meets the torque, speed, misalignment, space, and environmental demands of your application. Proper selection will ensure efficient power transmission, reliable operation, and extended lifespan of the chain coupling.

editor by CX 2024-05-10